September 23, 2017

Subscribe to SLJ

Mobile Maker Spaces

FMS2

The production cart includes a tripod with iPad Pro mount, a piano keyboard, professional lighting, mics, headphones, and various items to help students produce movies, videos, and podcasts.

The concept was pretty straightforward, but the logistics were a bit complicated. We wanted to create four mobile maker space carts that could rotate among four middle school libraries in the Knox County School district of Knoxville, TN. It all started when our director of instructional technology, Theresa Nixon, encouraged us to apply for a TeacherPreneur Grant to fund a traveling maker space program. Our funding goal was approximately $50,000. Requesting  this much money meant that we needed a
an idea that dazzled.

As we prepared the grant application, the librarians representing the middle schools (Farragut, Vine, Carter, and Karns) discussed rotating maker space carts that would dock in each library for nine weeks. We hoped to optimize accessibility to high-ticket items such as 3-D printers and keep our libraries dynamic with new projects.

The Art Cart features duct tape and items for screen printing, letterpress, zine making, sewing, and more.

The Art Cart features duct tape and items for screen printing, letterpress, zine making, sewing, and more.

What we bought and why

As we discussed our vision for the individual carts, we saw thematic patterns emerge. We wanted an art cart and a STEM cart. Then we added a production cart, packed with tools to produce short films, podcasts, and stop-motion animation. An additional one was dedicated to 3-D printing. The majority of our proposed budget would go toward stocking these carts. However, we also purchased items that could be kept at stationary maker space areas in each library—the docking stations.

Our decisions were collaborative, and over the course of a week we worked to outline our budget. As it developed, we continued to add to our wish list of items knowing that we could discuss, change, and customize it  as needed. Creating the budget was both exciting and daunting as we determined what we wanted—and the necessary support tools and/or accessories.

hvQqgeFmMaQ1q1jB0NM3B3pFmqwhlEBckxyUV84C8ewj6224S2uVo_VkTKuNwrG0mzaRrw=s190

The Ultimaker 2 Go 3-D printers come with an easy-to-carry case (left). Printing supplies, filament, tools, and other materials stay at the docking stations.

If we ordered a sewing machine, must we order needles and bobbins? Probably. What about a book on sewing? Definitely. We bought STEM cart items such as Arduinos and Raspberry Pis with the confidence that we were capable of learning to use them. No one on the team had used a 3-D printer, but we were excited to offer these opportunities to our students.

Our group also referred to a variety of published maker space lists. These were helpful—and occasionally overwhelming. Without preconceived notions of what we wanted, we spent several late nights researching products and scouting the best prices, while calculating how many of each item we needed. (What does this do? And should we buy 48 of them?) Quickly, however, we became experts, knowing what type of wireless microphone works best with an iPad, for instance, and making sure we ordered instructional DVDs for screen-printing or robotics. In the process, we’ve become informed educators.

Purchasing process;
designing the docks

Ozobots

Student use iPad Pros to program the Ozobots.

We bought as many items as possible from single vendors such as Amazon, Blick, and Maker Shed, which helped get the orders moving and the products in hand. As far as the purchasing process, our IT director determined that the ordering and payments would run more smoothly if it was centralized in one school location, rather than at the district level.

VMS

The STEM cart features Arduinos, Raspberry Pis, BrushBots, and more circuitry and robotic items.

The biggest issues were identifying vendors who would work with purchase orders—and encountering vendors who didn’t have items in stock. Overall, most of the vendors have been great to work with, especially given billing and shipping didn’t always match.

For the STEM and production carts, we purchased  rolling storage trunks with wheels on one side and a handle on the other. They’re 40 inches long, 20 inches tall, and hold about 225 pounds of equipment and supplies. The art cart resembles a flexible wagon, and the two 3-D printers are built to travel in their shells.

Next, we had to make docking spaces for the carts. One librarian cleared out a back room that had been her office previously. It has plenty of counter space, cabinets, and shelving for storage, plus a sink for cleanup of messier projects. A library with limited square footage put the maker area inside the library proper, while a third freed up a large area next to the circulation desk—allowing the librarian to keep an eye on activities. (There’s also secure storage for the cart behind the desk.)  Another set up a maker space spot, known as the DIY Lab, on a lower-level library mezzanine.

up and running

FriendlyLoom

Each school library has a loom that doesn’t travel.

The carts are currently docked at the first stop in their rotations, and we’re getting positive feedback from students and teachers. We’ve been surprised and inspired by what the students are creating: a movie by seventh graders welcoming rising fifth graders to the middle school; podcasts on the topics of teen driving, “If I had 24 hours to live,” and other self-chosen themes. Students who formed a club had the goal of becoming Arduino experts and peer instructors.

We’ve loved showing students how to make a gummi- worm piano keyboard with Makey Makey and watching their facial expressions transform from skepticism to wonder as they play the worms. Seeing students

A maker cart on the move.

A maker cart on the move.

expand their thinking while enjoying the maker space inspires us to figure out how to operate a Raspberry Pi—or collaborate with a math teacher to demonstrate the concept of cross sections using the 3-D printer.

We’re fortunate to have support from our administrators, school, and community. Not all of them entirely understand the maker space movement yet, but they’re curious. That’s all we need.


MobileMakerSpaces-Whats-onCarts


Mica Johnson, Brittany Witte, Jennie Randolph, Rachel Smith, and Karen Cragwall are librarians at Knox County Schools.

Share
Our newest installment of Maker Workshop will feature up-to-the-minute content to help you develop a rich maker program for your school or library. Join us to learn new ways of sparking engagement and hands-on learning directly from experts doing inspiring work that you can emulate, regardless of your library’s size or budget.
Empower Your Community with Coding
Launch a coding program in your library that will promote digital literacy and impact your community. You’ll learn how to run computer programming courses that will introduce your patrons to new career paths and technologies. We’ll explore all facets of building coding programming for your library such as making your case for funding, hosting Code Clubs and Hackathons, and curating free resources and technologies available online.

Comments

  1. Stephen Horrocks says:

    Excellent information in this! I am excited to see what comes of the 3D printing and the podcast production from the kids. Very cool.

  2. This article highlights the importance of creativity in schools. I love it!

  3. this is an excellent article, very informative and inspiring! i can’t wait to see what’s next

  4. Heather Mitchell says:

    What a great article! This entire idea looks so exciting! Im hoping there will be follow-up articles showing us how this all turns out! It is evident that a lot of work has gone into this!

  5. Nathan DiClaudio says:

    Excellent read, and very anxious to see what kind of things these young creatives can do with the resources!

  6. Elaine Deja says:

    Great information! I’m curious as to wireless mics for the IPads you purchased? I need to get some but don’t know which are the best. Thank you for the article. Elaine

    • Mica Johnson says:

      Elaine-
      We chose the Azden i-Coustics WMS-Pro. It comes with a handheld mic and a little clip on mic. So far we really like it, but we are still learning what gain is and how to adjust it for a good sound. We have used it to make a 5th grade orientation video, and a teacher is currently using it in his classroom. Thanks!